Drum or Tank L Gauge
|Level Switch Home|
|Products Level Control|
|Manuals + Questions level probe|
One of the most reliable and economical gauges is
recommended for small tank applications with
depths of 6” up to 30”.
· Highly visible top reading gauge.
· Tough, acrylic calibration dome.
· Available in 1 5/16”, 1 1/2”, and 2” openings.
· Available with flange for welding or soldering to tank.
A. CALIBRATION ASSEMBLY: Cellulose Acetate
B. INDICATOR NEEDLE: Red HDPE plastic
C. LOCK NUT: Red plastic to hold L Head in place. (options-aluminum lock nut)
D. DURO NITRILE GASKET: On which flanges on base of calibration assembly are firmly seated to
prevent leakage. (options-viton gasket)
E. ALUMINUM DIE CAST BUSHING: Type L-1.5 fits 1.5” standard npt tank flange. Type L-2 fits
standard 2” npt tank flange. L-1-5/16” is a stainless weld on flange.
F. BRASS RIVETS: One brass tubular rivet. (options-stainless)
G. FLOAT ARM ASSEMBLY: 0.1875 x 0.0625 galvanized steel flat rod, attached to indicator. (options-
H. PLASTIC FLOAT: High density polyethelene float 1.125” dia. x 3.0” long. (options-stainless float,
nitrophyll float, 3/4” float)
L-Gauges are manufactured to fit specific tank sizes from 6” to 30”. Float rod is varied in length to
accommodate different depths.
Ordering information—Part numbers are as follows: L-(opening)-(Depth). Example—L-2-6”.